Makita Double Bevel Sliding Miter Saw Manual

The Makita Double Bevel Sliding Miter Saw is designed for precision cutting and versatility. It features a powerful motor, dual bevel capability, and a large cutting capacity, making it ideal for both professional and DIY projects. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Saw 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Dual bevel capability, sliding mechanism, laser guide, and adjustable miter settings.

Feature	Description
Dual Bevel	Allows for bevel cuts in both directions without flipping the workpiece.
Sliding Mechanism	Increases cutting capacity for wider materials.
Laser Guide	Helps ensure accurate cuts by projecting a line on the workpiece.
Adjustable Miter Settings	Provides precise angle adjustments for various cuts.
Powerful Motor	Delivers high performance for cutting through tough materials.

Installation

Unpack and inspect contents. Place the saw on a stable work surface.

Secure the saw to the workbench using the provided clamps.
Connect to a power source: Ensure the voltage matches the saw's requirements.
Adjust the saw's position for optimal cutting access.

WARNING! Ensure the saw is stable and secure before use.

First-Time Setup

Power on the saw; follow the setup instructions.

Adjust the miter and bevel angles as needed.
Calibrate the laser guide for accurate alignment.
Test the saw with scrap material to ensure settings are correct.

CAUTION! Always wear safety gear when operating the saw.

Specifications

Model: Makita Double Bevel Sliding Miter Saw.
Motor Power: 15 Amp.
Blade Diameter: 12 inches.
Cutting Capacity: 2 x 12 inches at 90 degrees.
Bevel Range: 0° - 45° left and right.
Miter Range: 0° - 60° left and 0° - 52° right.
Weight: 56.2 lbs.
Power Source: 120V AC.

Controls and Settings

Access settings via the control panel. Key controls include the power switch, miter adjustment knob, and bevel adjustment lever.

Safety Features: Electric brake, blade guard, and safety switch to prevent accidental start.

Connecting Devices

Ensure the saw is unplugged before making any connections.

Connect dust collection system if available.
Ensure all cables are secured and not in the way of the cutting area.

Tip: Keep the work area clean and free of obstructions.

Operating the Saw

Follow these steps for safe operation:

Adjust the miter and bevel settings as required.
Place the material securely against the fence.
Power on the saw and allow it to reach full speed before cutting.
Make the cut smoothly and steadily.
Power off the saw after completing the cut.

WARNING! Always keep hands clear of the blade.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the saw after each use to remove dust and debris.
Check and replace the blade as necessary.
Inspect electrical components for wear or damage.

CAUTION! Always unplug the saw before performing maintenance.

Safety Information

Always follow safety guidelines when operating the saw.

Wear appropriate personal protective equipment (PPE).
Keep the work area well-lit and organized.
Do not operate the saw under the influence of drugs or alcohol.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Saw won't start	Power supply issue	Check power cord and outlet.
Blade not spinning	Motor issue	Inspect motor and electrical connections.
Inaccurate cuts	Misalignment	Check and adjust miter and bevel settings.
Excessive vibration	Worn blade	Replace blade and check for secure mounting.

Service: For further assistance, contact Makita customer service.