Makita Dual Bevel Sliding Miter Saw Manual

The Makita Dual Bevel Sliding Miter Saw is designed for precision cutting and versatility in woodworking projects. It features a powerful motor, dual bevel capability, and a sliding mechanism that allows for wider crosscuts. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Saw 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Dual bevel capability, sliding mechanism, laser guide, adjustable miter settings, and a robust base for stability.

Feature	Description
Dual Bevel	Allows for bevel cuts in both directions without repositioning the workpiece.
Sliding Mechanism	Increases cutting capacity for wider materials.
Laser Guide	Helps ensure accurate cuts by projecting a line onto the workpiece.
Adjustable Miter Settings	Provides precise angle adjustments for miter cuts.
Robust Base	Ensures stability during operation and reduces vibration.

Installation

Unpack and inspect contents. Place the saw on a stable work surface.

Ensure the work area is clean and well-lit.
Secure the saw to the workbench using clamps or bolts.
Connect to a power source with appropriate voltage.

WARNING! Always use proper safety gear when operating the saw.

First-Time Setup

Power on the saw; follow the setup instructions in the manual.

Adjust the blade height and angle according to your cutting needs.
Test the laser guide alignment before making cuts.
Familiarize yourself with the controls and settings.

CAUTION! Ensure the saw is unplugged when making adjustments.

Specifications

Blade Size: 12 inches.
Motor Power: 15 amps.
Bevel Capacity: 0° to 45° left and right.
Miter Capacity: 0° to 60° right, 0° to 45° left.
Weight: 56 lbs.
Dimensions: 30 x 22 x 18 inches.
Power Source: 120V AC.

Controls and Settings

Access the miter and bevel adjustments using the knobs located on the saw.

Safety Features: Blade guard, electric brake, and safety switch to prevent accidental starts.

Connecting Devices

Ensure the saw is connected to a power source before use.

Use appropriate extension cords if necessary.
Ensure all connections are secure and free from damage.

Tip: Always check the power source compatibility before connecting.

Operating the Saw

Follow these steps for safe operation:

Adjust the miter and bevel settings as required.
Position the workpiece securely against the fence.
Power on the saw and make the cut.
Always keep hands clear of the blade.

WARNING! Never reach over the blade while it is in motion.

Safety Features

The saw includes several safety features to protect the user:

Blade guard to prevent accidental contact.
Electric brake to stop the blade quickly.
Safety switch to prevent unintended activation.

Care & Cleaning

Unplug the saw before cleaning. Use a dry cloth to wipe down surfaces.

CAUTION! Do not use liquids or solvents on the saw.

Regulatory Information

This product complies with applicable safety standards and regulations. For support, visit www.makitatools.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blade not spinning	Power issue	Check power source and connections.
Inaccurate cuts	Misalignment	Adjust the miter and bevel settings.
Excessive vibration	Loose components	Tighten all screws and bolts.
Overheating	Continuous use	Allow the saw to cool down before resuming.

Reset: Refer to the manual for reset procedures if available.

Service: Contact Makita customer service for assistance.