Makita LS1017 Miter Saw Manual

The Makita LS1017 is a powerful 10-inch dual slide compound miter saw designed for precision cutting. It features a 15-amp motor, a large cutting capacity, and a range of miter and bevel settings for versatility. This manual provides essential information on safety, features, setup, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Miter Saw 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 10-inch blade, dual slide mechanism, laser guide, adjustable miter and bevel settings.

Feature	Description
15-Amp Motor	Powerful motor for efficient cutting performance
Large Cutting Capacity	Can cut up to 12 inches wide and 6 inches high
Laser Guide	Helps ensure accurate cuts
Bevel Adjustment	Easy adjustment for bevel cuts up to 45 degrees
Miter Adjustment	Adjustable miter settings from 0 to 52 degrees

Installation

Unpack the saw and inspect all components. Place the saw on a stable work surface.

Attach the saw to a workbench or stand for stability.
Ensure the power cord is in good condition and plug into a suitable outlet.
Adjust the miter and bevel settings as needed.

WARNING! Always ensure the saw is unplugged when making adjustments or changing blades.

First-Time Setup

Before using the saw, familiarize yourself with its features and controls.

Read the user manual thoroughly.
Check all safety features are functioning properly.
Make test cuts on scrap wood to adjust settings.

CAUTION! Always wear appropriate safety gear when operating the saw.

Specifications

Blade Diameter: 10 inches.
Motor Power: 15 amps.
Cutting Capacity: 12 inches wide, 6 inches high.
Miter Range: 0 to 52 degrees left and right.
Bevel Range: 0 to 45 degrees.
Weight: Approximately 50 lbs.
Power Source: 120V AC, 60Hz.

Controls and Settings

Access the miter and bevel controls located on the front and side of the saw.

Safety Features: Blade guard, electric brake, and safety switch.

Adjust the miter and bevel settings using the knobs and levers provided.

Connecting Devices

Ensure the saw is unplugged before connecting any accessories or attachments.

Attach dust collection system if available.
Use clamps to secure workpieces for safety.

Tip: Always double-check connections before operating the saw.

Operating the Miter Saw

Follow these steps for safe operation:

Adjust the miter and bevel settings as needed.
Place the workpiece against the fence and secure it.
Turn on the saw and allow the blade to reach full speed before cutting.
Make the cut and release the trigger to stop the blade.

WARNING! Keep hands away from the blade during operation.

Maintenance

Regular maintenance is essential for optimal performance.

Keep the saw clean and free of debris.
Inspect the blade for wear and replace as necessary.
Check all screws and bolts for tightness.

CAUTION! Unplug the saw before performing maintenance tasks.

Safety Information

Always follow safety guidelines when operating the miter saw.

Wear safety glasses and hearing protection.
Do not wear loose clothing or jewelry.
Keep the work area clean and well-lit.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Saw won't start	Power supply issue	Check power cord and outlet.
Blade not cutting	Dull blade	Replace with a sharp blade.
Excessive vibration	Loose components	Check and tighten all screws and bolts.
Laser not working	Battery issue	Replace the battery in the laser guide.

Service: For further assistance, contact Makita customer service.