Makita LS1212 Miter Saw Manual

The Makita LS1212 is a powerful 12-inch dual slide compound miter saw designed for precision cutting. It features a high-torque motor, a large cutting capacity, and an easy-to-read miter scale. This manual provides essential information on safety, features, setup, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Miter Saw 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: 12-inch blade, dual slide mechanism, laser guide, adjustable miter and bevel settings.

Feature	Description
12-inch Blade	Provides a wide cutting capacity for various materials.
Dual Slide Mechanism	Allows for smooth and accurate cuts.
Laser Guide	Helps in aligning cuts for precision.
Adjustable Miter Settings	Offers flexibility for different angles.
Bevel Adjustment	Enables bevel cuts up to 45 degrees.

Installation

Unpack the miter saw and place it on a stable work surface.

Ensure the saw is securely mounted to prevent movement during use.
Connect to a power source: Use a grounded outlet.
Check all components for proper assembly.

WARNING! Always wear safety gear when operating the saw.

First-Time Setup

Power on the saw and familiarize yourself with the controls.

Adjust the miter angle using the miter scale.
Set the bevel angle if needed.
Test the laser guide alignment.

CAUTION! Ensure the blade is properly installed before use.

Specifications

Blade Size: 12 inches.
Motor Power: 15 amps.
Cutting Capacity: 6-5/8 inches at 90 degrees.
Miter Angle Range: 0 to 52 degrees left and right.
Bevel Angle Range: 0 to 45 degrees.
Weight: 52.5 lbs.
Power Source: 120V AC.

Controls and Settings

Access the miter and bevel adjustments easily from the front panel.

Controls: Power switch, miter adjustment knob, bevel adjustment lever.

Ensure all settings are locked before making cuts.

Connecting Devices

Ensure the saw is unplugged before making any connections.

Connect to a power source using a heavy-duty extension cord if necessary.
Ensure the workspace is clear of obstacles.

Tip: Always check the power source for proper voltage.

Operating the Miter Saw

Follow these steps for safe operation:

Adjust the miter and bevel settings as needed.
Place the material securely against the fence.
Power on the saw and allow the blade to reach full speed before cutting.
Make the cut smoothly and steadily.

WARNING! Keep hands away from the blade during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Keep the blade clean and sharp.
Check for loose screws and tighten as necessary.
Store the saw in a dry place when not in use.

CAUTION! Unplug the saw before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blade does not spin	Power issue	Check power source and connections.
Inaccurate cuts	Misalignment	Check and adjust miter and bevel settings.
Excessive vibration	Loose components	Tighten all screws and check blade installation.
Laser guide not working	Battery issue	Replace the battery in the laser guide.

Service: For further assistance, contact Makita customer service.