Makita LS711D Miter Saw Manual

The Makita LS711D is a compact and lightweight miter saw designed for precision cutting of wood, plastic, and other materials. It features a powerful motor, a laser guide for accurate cuts, and a dust collection system to keep your workspace clean. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Miter Saw 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7-1/4 inch blade, laser guide, adjustable miter angles, and a sturdy base for stability.

Feature	Description
Laser Guide	Helps ensure accurate cuts
Adjustable Miter Angles	Allows for precise angle cuts
Dust Collection Port	Connects to vacuum for cleaner workspace
Lightweight Design	Easy to transport and maneuver
Safety Switch	Prevents accidental start-up

Installation

Unpack and inspect contents. Place on a stable surface.

Attach the saw to a workbench or stand for stability.
Connect the dust collection system if available.
Ensure the power cord is in good condition and plugged into a suitable outlet.

WARNING! Ensure the saw is securely mounted to avoid accidents.

First-Time Setup

Power on the saw; check the blade alignment.

Adjust the miter angle to 0 degrees for straight cuts.
Check the blade for proper installation and tightness.
Test the laser guide alignment with the blade.

CAUTION! Always wear safety goggles when operating the saw.

Specifications

Blade Size: 7-1/4 inches.
Motor Power: 120V, 15A.
Cutting Capacity: 2x8 inches at 90 degrees.
Miter Angles: 0-45 degrees left and right.
Weight: 28 lbs.
Dust Collection: Yes, with port.

Controls and Settings

Access settings via the control panel. Features include miter angle adjustment and blade height adjustment.

Safety Features: Safety switch and blade guard.

Connecting Devices

Ensure all connections are secure before operating the saw.

Connect the dust collection system if applicable.
Ensure the power cord is properly connected to an outlet.

Tip: Always check connections before starting the saw.

Operating the Miter Saw

Follow these steps for safe operation:

Adjust the miter angle as needed.
Place the material securely against the fence.
Power on the saw and allow the blade to reach full speed.
Make the cut, keeping hands clear of the blade.

WARNING! Never reach over the blade while it is in motion.

Safety Features

The saw includes a safety switch to prevent accidental start-up and a blade guard for protection.

Care & Cleaning

Unplug before cleaning. Use a dry cloth to clean the exterior; avoid using liquids.

CAUTION! Keep the saw away from moisture.

Regulatory Information

This product complies with applicable safety standards. For support, visit www.makitatools.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blade does not spin	Power issue	Check power connection and switch.
Laser guide not visible	Misalignment	Adjust laser guide according to instructions.
Dust collection ineffective	Clogged port	Check and clear dust collection port.
Inaccurate cuts	Blade dull	Replace or sharpen the blade.

Reset: Refer to the manual for reset instructions if available.

Service: Contact Makita customer service for assistance.