Makita Slide Compound Miter Saw Manual

The Makita Slide Compound Miter Saw is designed for precision cutting of wood, plastic, and other materials. It features a powerful motor, adjustable miter angles, and a laser guide for enhanced accuracy. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Saw 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Dual bevel design, laser guide, adjustable miter settings, and a robust base for stability.

Feature	Description
Laser Guide	Helps in making precise cuts
Dual Bevel	Allows for angled cuts in both directions
Adjustable Miter Settings	Provides flexibility for various cutting angles
Powerful Motor	Ensures efficient cutting through tough materials
Robust Base	Offers stability during operation

Installation

Unpack and inspect contents. Ensure a stable and secure work surface.

Attach the saw to a workbench or stand.
Ensure the power cord is properly connected to a power source.
Check that all safety features are functional.

WARNING! Ensure the saw is securely mounted to prevent accidents.

First-Time Setup

Power on the saw and familiarize yourself with its features.

Adjust the miter angle to the desired setting.
Set the bevel angle if necessary.
Test the laser guide alignment.

CAUTION! Always wear safety gear when operating the saw.

Specifications

Model: Makita Slide Compound Miter Saw.
Power: 15 Amp motor.
Blade Size: 10 inches.
Cutting Capacity: 2x8 at 90 degrees.
Miter Angles: 0-52 degrees left and right.
Bevel Angles: 0-45 degrees left and right.
Weight: 42 lbs.

Controls and Settings

Access the miter and bevel controls located on the front of the saw.

Safety Features: Blade guard, electric brake, and safety switch.

Connecting Devices

Ensure the saw is unplugged before making any connections.

Connect to a suitable power outlet.
Use extension cords rated for the saw's power requirements if necessary.

Tip: Always check the power source before operation.

Operating the Saw

Follow these steps for safe operation:

Adjust the miter and bevel settings as needed.
Place the material securely against the fence.
Power on the saw and make the cut.

WARNING! Keep hands clear of the blade during operation.

Safety Features

Includes blade guard, electric brake, and a safety switch to prevent accidental starts.

Care & Cleaning

Unplug before cleaning. Use a soft cloth to clean the exterior; avoid harsh chemicals.

CAUTION! Do not use water or liquids on the saw.

Regulatory Information

Meets safety standards for power tools. For support, visit www.makitatools.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blade not spinning	Power issue	Check power connection and switch.
Inaccurate cuts	Misalignment	Check and adjust miter and bevel settings.
Excessive vibration	Loose parts	Tighten all screws and bolts.
Overheating	Continuous use	Allow the saw to cool down before resuming.

Reset: Refer to the manual for resetting procedures if available.

Service: Contact customer service for repairs and maintenance.