Makita Sliding Miter Saw 12 Manual

The Makita Sliding Miter Saw 12 is a powerful tool designed for precision cutting in various materials. It features a robust motor, dual bevel capability, and a large cutting capacity, making it ideal for both professional and DIY projects. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Saw 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 12-inch blade, dual bevel capability, laser guide, adjustable miter angles, and a sturdy base for stability.

Feature	Description
12-inch Blade	For cutting through a variety of materials with precision.
Dual Bevel Capability	Allows for angled cuts in both directions.
Laser Guide	Helps in aligning cuts accurately.
Adjustable Miter Angles	For making precise crosscuts and miters.
Sturdy Base	Provides stability during operation.

Installation

Unpack and inspect the saw. Place it on a stable work surface.

Attach the saw to a workbench using the provided clamps.
Ensure the power cord is properly connected to a suitable outlet.
Adjust the saw to the desired height for comfortable operation.

WARNING! Ensure the saw is securely mounted to avoid accidents.

First-Time Setup

Power on the saw and follow the setup instructions.

Install the blade: Follow the instructions in the manual for proper installation.
Adjust the laser guide for accurate alignment.
Test the saw with a scrap piece of wood to ensure proper operation.

CAUTION! Always wear safety gear when operating the saw.

Specifications

Blade Diameter: 12 inches.
Motor Power: 15 Amp.
Bevel Capacity: 0° to 45° left and right.
Miter Capacity: 0° to 52° left and right.
Weight: 50 lbs.
Dimensions: 30 x 20 x 15 inches.
Power Source: 120V AC.

Controls and Settings

Access settings via the control panel located on the front of the saw. Key controls include power switch, bevel adjustment, and miter adjustment knobs.

Safety Features: Blade guard, electric brake, and safety switch to prevent accidental starts.

Connecting Devices

Ensure the saw is unplugged before making any connections.

Connect the saw to a power source using the provided power cord.
Use an extension cord if necessary, ensuring it is rated for the saw's power requirements.

Tip: Always check the power source before connecting the saw.

Operating the Saw

Follow these steps to operate the saw safely and effectively.

Power on the saw and allow it to reach full speed.
Position the material against the fence and align with the laser guide.
Lower the blade slowly and make the cut.
Release the trigger to stop the blade and wait for it to come to a complete stop before removing the material.

WARNING! Keep hands clear of the blade during operation.

Safety Features

The saw is equipped with several safety features to protect the user during operation.

Blade guard to prevent accidental contact.
Electric brake to stop the blade quickly.
Safety switch to prevent accidental starts.

Care & Cleaning

Unplug the saw before cleaning. Use a dry cloth to wipe down the exterior; do not use liquids.

CAUTION! Keep the saw away from moisture and extreme temperatures.

Regulatory Information

This saw complies with all relevant safety standards and regulations. For support, visit www.makitatools.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Saw does not start	Power source issue	Check power connection and ensure the switch is on.
Blade not spinning	Motor issue	Inspect motor and wiring for damage.
Inaccurate cuts	Misalignment	Check alignment of the blade and adjust as necessary.
Excessive vibration	Loose parts	Tighten all screws and bolts.

Reset: Refer to the manual for reset instructions if available.

Service: Contact Makita customer service for further assistance.